Friday, December 7, 2018
University of California San Diego electrical and computer engineering professor Alexander Vardy, has been elected a Fellow of the Association for Computing Machinery (ACM), the world’s largest educational and scientific computing society.
Friday, March 2, 2018
STIP is a strategic international partnership between UC San Diego, The City of San Diego, the Ulsan National Institute of Science and Technology (UNIST) and the Ulsan Metropolitan City in Korea, along with industry partners. For more information about the event, including preliminary agenda and registration go to http://globalstip.ucsd.edu/
Thursday, October 20, 2016
In 2016 ECE Prof. Gabriel Rebeiz was elected to the National Academy of Engineering, one of the highest professional honors for engineers. He was recognized for his “contributions to radio-frequency micro-electronmechanical systems (RF MEMS) and phased-array technologies.”
Rebeiz is a pioneer in the development of the arrays of electronically-steered antennas that will soon be much lighter, generate less draft and prove more reliable than today’s mechanically-driven antenna systems which airlines install on top of their planes to allow passengers to use the Internet five or six miles in the air.
Monday, February 22, 2016
“A Highly-Digital Frequency Synthesizer Using Ring-Oscillator Frequency-to Digital Conversion and Noise Cancellation” Colin Weltin-Wu, Guobi Zhao, Ian Galton
Analog Devices, San Jose, CA University of California, San Diego, CA2
Friday, November 6, 2015
2:00pm-4:00pm Jacobs Hall 4309
CWC Advisor: Prof. Gabriel Rebeiz
High-efficiency On-chip Antennas at mm-Wave Frequencies and Tunable Circuits for Cellular Communications
Thursday, November 5, 2015
Dr. Eric Fogleman, Senior Director, RF/Mixed-Signal Design at MaxLinear will be giving a guest lecture at Prof. Galton's ECE264C class on November 5th at 8am in Center Hall 201. Dr. Fogleman is an alumnus of UC San Diego's ECE Dept.
Friday, October 30, 2015
We look forward to your presence at the 2015 Annual Research Review to be held at UC San Diego, Faculty Club, Atkinson Pavilion on Friday, October 30, 2015, 9AM - 7PM.
Friday, October 16, 2015
Oct 16, 2015 12:00pm - 2:00pm - Location: EBU1 4309
CWC Advisor: Prof. Pamela Cosman
Video Transmission in Tactical Cognitive Radio Networks Under Disruptive Attacks
Thursday, October 8, 2015
Industrial IoT Initiative: Welcoming KETI
The vision of the CWC is to start a mutually beneficial collaboration with KETI (Korea Electronics Technology Institute) that will employ smart techniques in what is called “factory-things.” With increased efficiencies in cost, processes, manufacturing and performance, the US smart factory will once again dominate the competition.
“Transformation of manufacturing with IoT’s will help the US maintain its competitive edge in the manufacturing industries,” says Sujit Dey, Director, Center for Wireless Communications at UC San Diego.
What exactly is Industrial IoT?
As we know, IoT can bridge between many interfaces (or be employed across multiple interfaces). Human to Machine, Machine to Human, and Machine to Machine or “M2M”. M2M will be key in enabling better processes by providing insightful information back to the factory. The large amount of data collected will require machine learning techniques to parse out the components with the most utility. With the collaboration with KETI, UC San Diego’s Center for Wireless Communications will do just that.
“Starting this initiative with KETI, that has a dedicated advanced Industrial IoT group in the Smart Factory ICT Research Center, along with the manufacturing powerhouse that is Korea, is going to be very productive. We are excited about this collaboration with KETI and are hopeful to expand it with new factory partners” says Dey.
The KETI collaboration will focus on deriving two specialized types of data-mining models. One will be “Predictive Analytics” which is adaptive and captures the performance of the process, the other is “Prescriptive Analytics” which will use the predictive model to assess the reason behind performance failures. Further design challenges include determining how these devices will be able to share information and what the overall network topology will look like. These obstacles will play a large factor in how the group determines and prioritizes its goals.
“Through the KETI-CWC smart manufacturing research project, both countries can develop an advanced smart manufacturing platform and have a mutual utilization of test-beds built in each country ” says Soojin Ji, Associate Researcher, Convergence Emerging Industries R&D Division, Smart Factory ICT Research Center, “by doing this project, we expect that smart factory related corporations in both countries are more likely to acquire global competitiveness in various ways.”
Wednesday, September 23, 2015
Patrick Mercier is the first professor in the Department of Electrical and Computer Engineering at the University of California, San Diego to receive a Beckman Young Investigator (BYI) Award from the Arnold and Mabel Beckman Foundation.